IQDuinoYour projects — our hardware
Controllers and RFID readers for your projects
Connect peripherals and program controllers and RFID readers in Arduino IDE on a ready-made hardware platform.
Arduino compatible
All IQDuino devices are compatible with the Arduino ecosystem. Write your own firmware in Arduino IDE: control peripherals, work with RFID cards and build your project logic on ready-made hardware.
Use the Arduino core, board configuration and libraries appropriate for your microcontroller. Firmware upload methods depend on the model and installed bootloader.
Controllers
All controllers
IQDuino ST
A ready-made peripheral interface platform for single-board computers. UART, two RS-232 channels, SPI, I²C and GPIO connect project software to external devices without designing a separate interface board.
- Interfaces
- UART, 2 × RS-232, SPI, I²C, GPIO
- Flash memory
- 128 / 256 / 384 / 512 KB
Arduino compatible · Arduino IDE
View device
IQDuino AVR
A ready-made peripheral interface platform for single-board computers. UART, two RS-232 channels, SPI, I²C and GPIO connect project software to external devices without designing a separate interface board.
- Interfaces
- UART, 2 × RS-232, SPI, I²C, GPIO
- Flash memory
- 128 / 256 KB
Arduino compatible · Arduino IDE
View deviceRFID readers
All readers
IQDuino RFID 663 Nordic
nRF52832 + CLRC66301HN,551. USB / UART / Bluetooth
- Interfaces
- USB, UART, Bluetooth
- Reading range
- 10+ cm
Arduino compatible · Arduino IDE
View device
IQDuino RFID 522 AVR
ATMEGA32U4-MUR + MFRC52202HN1,151. UART / USB
- Interfaces
- USB, UART
- Reading range
- 5 cm
Arduino compatible · Arduino IDE
View device
IQDuino RFID ST25 STM32
STM32F103C8 / STM32F103CB + ST25R3911B. UART / USB / SPI
- Interfaces
- USB, UART, SPI
- Reading range
- 10+ cm
Arduino compatible · Arduino IDE
View device
IQDuino RFID 663 AVR
ATMEGA32U4-MUR + CLRC66301HN,551. USB / UART
- Interfaces
- USB, UART
- Reading range
- 10+ cm
Arduino compatible · Arduino IDE
View deviceYour firmware. Ready-made hardware.
Start with a ready-made hardware platform rather than PCB and RF design. Add your own logic and connect the device to your automation system.
Applications| Interfaces | UART, RS-232, SPI, I²C, GPIO |
|---|---|
| Choose your architecture | AVR / STM32 / Nordic |
| Assembly power | 12 V → 5 V / 3 A / 15 W |
About the IQDuino platform
Platform overview
Start with a ready-made hardware platform rather than PCB and RF design. Add your own logic and connect the device to your automation system.
The manufacturer reports several years of continuous 24/7 operation for the controllers and readers.
Find the platform for your project
Tell us about the interfaces, cards, single-board computer and peripherals your project needs. We will help select the platform and form factor.
info@iqlab.dev